HomeWhy It WorksHow It WorksCommercial UsageMSDSThe Odor EliminatorFAQ
 
Home Health
Home Restoration
Bathrooms
Mold & Mildew

HOME RESTORATION

WHERE ODORS HAVE PENETRATED SUBSTRATES


Mal-Odors due to smoke from house fires, excess moisture causing mold & mildew, smoke/tobacco, pet urine, odors from chronically ill persons, skunk spray, or any other noxious smell may be completely eliminated using NOK-OUT.  Not being a product that masks odors, or an enzyme that consumes odors, NOK-OUT is a true deodorant and disinfectant that uses oxidation to change the odor to a substance that has no odor and disinfects all with which it comes into contact.  NOK-OUT MUST BE APPLIED ON THE SOURCE OF THE ODOR TO BE COMPLETELY EFFECTIVE!

 

  1. Where carpet has been the site of contamination and is the source of the odor, treating with NOK-OUT may be applied by using a carpet shampooer/ cleaner, placing 16 oz of NOK-OUT per tank of water (where the tank does not to exceed 2 gallons).  Allow NOK-OUT to penetrate as far into the carpet fibers as possible by not extracting the solution back into the tank for 1-2 minutes.  Using ceiling or floor fans, dry as quickly as possible.  Nok-Out will continue to be effective even though dry. 
  2. For persistent or severe odors, it is recommended that the carpet be removed, and the sub flooring be treated with a solution of 50% NOK-OUT and 50% water.  Spray this solution using a sprayer that has a fine mist, allowing NOK-OUT to penetrate into the pores of the substrate.  Let NOK-OUT saturate the sub flooring for up to 10 minutes before wiping away residue.
  3. If possible, remove baseboards and spray behind them as well.
  4. The AC/Heating system should be sprayed with NOK-OUT at all the vents, intake air vents, AC Filter, and into ductwork, with a sprayer providing a fine, strong mist.  The Fogmaster, Jr, is an excellent tool for this purpose, and is available from Osburn Distributors.  Adjust the ‘fan’ setting to ‘ON’ rather than “AUTO” for 24 hours to circulate Nok-Out through the house.
  5. Place a humidifier with 8 oz. of NOK-OUT per gallon tank and fill with water.  Place this in the attic, and allow to run for up to 1 hour.  Let air-dry.  Remember that you are introducing moisture into the air when this step is taken, and where humidity and moisture is already a problem, this method of application is not recommended.
  6. Window coverings should be sprayed, another good application for the Fogmaster Jr.  It is not necessary to mist to the point of causing dripping, but to provide good coverage.
  7. Careful spraying of walls, door facings, and into the corners of each room where odor exists should be performed.   It is not necessary to wipe the walls dry, unless moisture is a problem in the home.  Do allow for quick drying time by turning on ceiling or floor fans.
  8. For deeply embedded odors which have been laid down over a long period of time, spray into cupboards, cabinets, closets, behind appliances etc. 
  9. NOK-OUT should be poured on bathroom grout between tiles, and around the shower, tub, lavatory, and toilet.  Allow it to penetrate into the grout for up to 10 minutes before wiping dry.

 

No matter where an odor or mold and mildew has penetrated, NOK-OUT will eliminate the odor, if care is taken to allow it to get to the site where odor molecules exist. 

 


© 2001 Osburn Distributors, All Rights Reserved

 

 

Call us at 886.551.1927 or e-mail: lou@nokout.com
 
   
Sign up for the Nok-Out newsletter.