Home » SNiPER-Disinfectant » 4oz SNiPER - shipping included

4oz SNiPER - shipping included

4oz SNiPER - shipping included
SKU 33004
Quantity in stock 13 item(s) available
Weight 0.40 lbs

Product Description

4 oz travel size SNiPER disinfectant and Odor Eliminator


Your clean home is more than sparkling, dust-free counter tops, and well vacuumed flooring. It should and can be free from odors, and free from harsh checmicals too…with SNiPER™!


The most important thing to know in order to make SNiPER® work best for you is to remember that Nok-Out is an oxidizer and does it's job when it comes into direct contact with the source of the odor. Direct contact with ALL of the stinky stuff is essential in order for SNiPER® to do a thorough job of removing odors permanently. For additional application instructions, see the “How-To-Use” section in the left-hand column of www.nokout.com.


  • Routine pick-ups and waste paper removal will keep things orderly and will help you to quickly resolve the problem when accidents occur.
  • At the site of a big occurrence, carefully eliminate any dangerous items first: sharp glass, broken pottery, anything that may harm you, your family or pets.


  • Instead of synthetic odors of clove, cinnamon, lemons or flowers, simply spray the air with SNiPER®. Chemical deodorizing fresheners can irritate the eyes, cause severe headaches and contribute to Sick Building Syndrome.  Use SNiPER® instead, because we all want to have clean fresh air in our homes and offices. For best results, use a fogger, humidifier or vaporizer.


  • Remember that liquids (such as urine) will ‘wick’ outwards from the site of the contamination. Although the stain on top may be small, underneath, the damage may have spread in an irregular pattern. Treat outwards from the site of the stain, allowing penetration to occur. See: http://www.nokout.com/Carpet-Odors.html.
  • To really penetrate into heavily padded upholstery pieces, dilute nok-out by up to 4 : 1 (water : SNiPER®). Apply heavily and allow SNiPER® to saturate/penetrate up to 30 m. Then, blot up any excess fluid and put fans on it to speed drying.
  • A syringe filled with SNiPER® may be injected into padding of both carpet and upholstery at regular intervals around the site of the contamination. This assures you of the likelihood of reaching all odor molecules.


  • Keep your pets clean with regular grooming. Minimize the amounts of pet dander and pet hair in your home. Your can spray SNiPER® directly on fur to quickly remove all surface odors. Give your pet a rub-down using SNiPER®. A nice massage is good for the both of you!
  • Even when reduced by 50%, SNiPER® retains odor eliminating qualities.
  • Covered litter boxes may be just fine for you…but pity the poor cat who has to eliminate in them! Odors collect and stay inside! Treat the entire box, if you prefer to covered type. Spray the entire interior every time you remove solid wastes, or change the litter. Your cat will smile!
  • Cat urine  in the carpet is no problem for SNiPER®.
  • SNiPER® works best in an alkaline environment. If your cat vomits on the floor (carpet or hardwood flooring) the acidic nature of vomit should be neutralized with a mild baking soda solution before using SNiPER®. Blot up as much as possible, saturate with a baking soda solution, blot again, and apply SNiPER®.
  • SNiPER® works to eliminate odors and safely disinfect aviary cages and perches. It is totally safe to use, even around baby birds.
  • You can even spray in the landscape where the neighbors’ pet has eliminated. Reduce SNiPER® by 50% with water. SNiPER® will not harm your foundation plants and perennials.


  • Wipe the entire refrigerator (inside and out!) with SNiPER®. If your ‘fridge’ has a drip pan, clean it out every month, and spray liberally with Nok-Out. The moisture in the pan causes bacteria to grow…and smell bad. The active ingredient in SNiPER® - chlorine dioxide - is well known to destroy bacteria, mold, mildew and many pathogens.
  • Spray the fins on the backside of the refrigerator, every-time you vacuum behind the box.


  • Wipe down the vents in each room with SNiPER® to remove dust and collected soil. Spray SNiPER® into the vents to allow clean, fresh air to circulate into every room.
  • Spray SNiPER® on the AC/Heat Filter every time you change the filter, and several times a year.
  • Spray SNiPER® into the Return Air Duct, to help circulate and cleanse each room.
  • For Sick Building Syndrome, SNiPER® can help! 


  • When the moldy, contaminated site is dry, but puffy sites of mold remain, mold spores are more likely to disperse into the air to start new colonies. It is important to remove the visible mold and immediately treat with SNiPER®.
  • Mold & mildew cannot grow where moisture is not present. After a clean-up, dry the site completely and keep as dry as possible to prevent new growth from occurring. If the environment remains moist, repeated applications of SNiPER® will keep mold populations from spreading and will inhibit growth.
  • Circulate air in your living spaces as much as possible to prevent mildew and mold from developing.
  • Dust regularly. A light spray of SNiPER® on the dust cloth is perfect for simple dust removal.
  • Use SNiPER® as directed for specific mold problems.


  • Smelly mattresses and mattress pads may be rescued from body secretion odors. Long-standing odors may pose a more difficult application procedure, but once SNiPER® gets on the SOURCE of the problem, it is gone.
  • Sponge or spray SNiPER® directly on bed sores, or other suppurating wounds soothes at the site. SNiPER® will destroy mal-odors, which allows recommended salves and ointments to be more effective.
  • The atmosphere in a room where chronic illnesses are present can be restored daily by a quick misting spray of SNiPER®.
  • Remember that SNiPER® is an EPA registered hospital disinfectant and may be used safely in your home.  It's powerful enough to kill tough pathogens like MRSA, but safe enough to wash your hands with.
  • Be sure and spray 'high-contact' surfaces such as doorknobs and the flush-handle on the toilet regularly because those areas are known to be quite 'germy'.


  • Spray your hands with SNiPER®. It will remove all topical odors and keep non-smokers happier to be around you.
  • Spray or wipe your ashtrays with SNiPER® to prevent a build-up of odor molecules. Your whole house will benefit.
  • Keep a small bottle (the 4 oz. size is good) of SNiPER® in your purse or car for immediate odor removal in clothing or in the car.
  • When the seasons change, and you switch out clothing for the next season, spray each garment with SNiPER® to prevent a hold-over of tobacco molecules in fabric. Allow to dry completely before returning to the closet.
  • Spray door facings both inside and outside with SNiPER® to keep tobacco odors from spreading throughout the house.
  • for more details, see https://www.nokout.com/Tobacco-and-Smoke-Odor.html


  • Always allow the site to dry completely after applying SNiPER®. As an oxidizer, SNiPER® must dry to complete the job.
  • Residual odors from household fires (as when the popcorn burns up in the microwave) can be treated with a good spray of SNiPER®.
  • Recreational vehicles when re-opened for the season may be completely deodorized and sanitized with Nok-Out. Specific application instructions are available upon request.
  • Spray SNiPER® around the base of the toilet. Allow it to penetrate into the grout.
  • Stinky shoes and boots will smell fresh as new when treated with SNiPER®. Specific application directions here. After the party is over, refresh your home by spraying SNiPER® all over the house. Use as fine a misting sprayer as possible for the best penetrating results.


  • If possible, remove any liners from outer shell of gear to be cleaned.
  • Arrange gear so that as much surface as possible will be exposed for cleaning. Remember: SNiPER® must touch the source of the odor or microbe to eliminate it.
  • Use a spray bottle to spray an even coat of SNiPER® on all contaminated and surrounding surfaces of the gear including all sides, any liner assembly and padding. Note: It is not necessary to saturate or cause puddling of product.
  • Allow the SNiPER® to dwell for one to three minutes to allow the surfactant to loosen any grime or dirt that is present.
  • Hand wash the surfaces of the gear including liner assembly with a lightly dampened clean sponge or clean cloth. Use care to wipe all surfaces very thoroughly to remove all substances or gross filth that may be stuck on surfaces. (The microbes eat and grow in that crud, so removing it deprives them of a food source.)
  • Evaluate the odor and gross filth mitigation and repeat the cleaning cycle if needed.
  • For lasting disinfection and deodorization, use a spray bottle to spray a light even coat of SNiPER® on all surfaces of the gear.
  • Allow to air dry.


SNiPER® has a pH of 8.5. If you have previously used an acidic cleanser such as vinegar or a citrus-based cleanser, you should make a mild baking soda / water solution (1 tsp / 1 pint) and spray the area where the acidic cleanser was used, to neutralize the acid before applying Nok-Out or SNiPER. This will allow our products to work most efficiently and effectively.

If you have any questions regarding how to apply SNiPER®, check the left hand column of www.nokout.com; there are many 'How-To-Use' articles there. Or, call toll free to 866 551 1927.

: *
: *
: *

How to use